[User] bridged configuration

[Matt Kraai]

Hi,

On Sun, Jan 11, 2015 at 01:46:36PM -0800, Jeremy Malcolm wrote:
> I just acquired an Open Wireless router with version OWrt MVP-HOPE r41336 3.10.44-6 firmware, and the web interface seems to be a bit sparse.  There doesn’t seem to be a way to tell it what TCP/IP network settings to use, or a way to switch between into a bridged configuration so that it wouldn’t do NAT or DHCP for other devices (at least for the private network; for the openwireless.org <http://openwireless.org/> network it doesn’t matter if it does).  Is that possible?  I am OK with using SSH.  Sorry if I missed some documentation somewhere.  There wasn’t any in the box.

I'm not sure how to do exactly what you want.  Here's what README.md
says:

> # Networking Setup
>
> We have assumed a specific networking setup in designing the
> software. This networking setup is described in NetworkingSetup.png
> and the open wireless router should work in this standard
> setup. However users may be interested in alternate setups (e.g No
> Modem-Router interfacing to ISP, instead there is a pure modem and
> no DHCP server to allocate address to WAN port of the OpenWireless
> router. There are several other variations possible). Since we have
> not designed the router firmware to support such alternate setups,
> user effort will be required to get the OpenWireless router to work
> for them. Typically this will involve gaining root access to the
> router through SSH and then changing the files controlling network
> configuration to align with the setup that is desired. If you have
> gotten an alternate setup to work, we encourage you to share the
> details with other users. Even better if you can make pull requests
> that we can include in the firmware to make things easier for future
> users of non-standard setups.

You can find a little information about doing some network
configuration at

 https://github.com/EFForg/OpenWireless/wiki/Running-a-Tor-relay

-- 
Matt